WhatsApp: +86-18918922871 Email:globalsales2013@gmail.com

Home » Products » Plastic Injection Molding Machines » HXF Series Standard Injection Molding Machine

HX(*) 128 Injection Molding Machines

  • pic/pp1.jpg
  • pic/pp2.jpg
Description

Features
1. HX servo drive motor injection molding machine is with clamping force ranging from 65 to 2000 tons.
2. Oil temperature is greatly reduced than other molding machines.
3. During mold opening and closing, impact is weak. Thus, machine life as well as the mold life is prolonged.


  • Product introduction
  • Inquiry Now

Features
1. HX servo drive motor injection molding machine is with clamping force ranging from 65 to 2000 tons.
2. Oil temperature is greatly reduced than other molding machines.
3. During mold opening and closing, impact is weak. Thus, machine life as well as the mold life is prolonged.
4. Hydraulic variable pump controlling system features fast response and short forming cycle, which contributes to energy saving and environment protection. Besides, with this high-performance variable pump controlling system, three-way ratio valve is not a must to HX 128 servo drive motor injection molding machine.

Advantages of HX 128 Injection Moulding Device
1. Molding Stability
Adoption of servo motor closed-loop control ensures great improvement in repeatability.
2. Quiet Operation
Lower noise is generated, particularly in low speed applications.
3. Reliable Holding Pressure
Compared with traditional hydraulic machine, HX 128 servo drive motor injection molding machine is of more stable holding pressure.
4. Better Oil Temperature Stability
Only the necessary hydraulic oil needed for multi functions is delivered by servo system, which as a result avoids unnecessary generation of heat and substantially lowers the oil cooling requirements.

Why Do People Choose Our Injection Molding Machine?

Parameters of HX 128 Servo Drive Motor Injection Molding Machine :

MODEL:HX(*)128/420
TECHNICAL PARAMETER TABLE A B C
INJECTION UNIT SCREW DIAMETER mm 35 38 42
SCREW L/D RATIO L/D 23.8 22 19.9
INJECTION CAPACITY (THEORETICAL) cm3 192 226 277
INJECTION WEIGHT(PS) g 143 168 206
Oz 6.1 7.2 8.8
INJECTION PRESSURE MPa 219 186 152
INJECTION RATE g/s 87 102 126
PLASTICIZING CAPACITY g/s 11 13 15
SCREW SPEED rpm 200
CLAMPING UNIT CLAMP FORCE KN 1280
OPEN STROKE mm 350
    MAX. MOULD mm 450
MIN. MOULD mm 150
SPACE BWTWEEN TIE-BARS (W×H) mm 410×370
EJECTOR FORCE KN 45
EJECTOR STROKE KN 120
EJECTOR NUMBER n 5
OTHERS PUMP PRESSURE MPa 16
MOTOR POWER KW 13/15
HEATING POWER KW 10.5
MACHINE DIMENSION (L×W×H) m 4.41*1.2*1.89
MACHINE WEIGHT t 3.2
OIL TANK CAPACITY L 235

Mold Plate Dimension: