EN
AR
BG
FR
DE
IT
JA
KO
PT
RU
ES
LT
SR
VI
HU
Mold Temperature Controller
Description
Advantages
1. The mold temperature controller is accurately controlled by PID micro computer.
2. Protection against pump overload is provided, contributing a lot to prolonging the machine’s service life.
3. This auxiliary machine for plastic injection molding adopts alarm device in case that the liquid level is too low, which helps to make system run safely.
4. The heating barrel is made of stainless steel and is easy to clean.
- Product introduction
- Inquiry Now
Advantages
1. The mold temperature controller is accurately controlled by PID micro computer.
2. Protection against pump overload is provided, contributing a lot to prolonging the machine’s service life.
3. This auxiliary machine for plastic injection molding adopts alarm device in case that the liquid level is too low, which helps to make system run safely.
4. The heating barrel is made of stainless steel and is easy to clean.
5. This mold temperature controller is equipped with indicator capable of detecting various problems, which enables the customers to timely know the malfunction reason and accordingly solve the problem.
6. The switch of main power source is in conformity with CE safety standard.
7. Air blower is installed to make the cleaning convenient and to prolong the life span.
8. HYSION temperature controller improves molding efficiency and reduces defective products. Moreover, it is beneficial to speed up manufacturing efficiency, reducing energy consumption and saving energy.
Parameters of Mold Temperature Controller
| Model | Max Temp℃ | Heat (kw) |
Pump (kw) | Flux L/min | Heating Medium |
Cooling Mode |
Mold Tie (Inch) |
External Dimensions (L×W×H) |
Weight(kg) |
| STC-6W | 95 | 6 | 0.37 | 45 | 3/8×2×2 | 780×260×650 | 65 | ||
| STC-9W | 95 | 9 | 0.75 | 56 | 3/8×4×2 | 780×260×650 | 68 | ||
| STC-12W | 95 | 12 | 1.5 | 80 | Direct | 3/8×6×2 | 780×260×650 | 70 | |
| STC-18W | 95 | 9×2 | 1.5 | 200 | Water | Cooling | 3/8×6×2 | 900×400×810 | 100 |
| STC-24W | 95 | 12×2 | 2.2 | 315 | 3/8×6×2 | 900×400×810 | 100 | ||
| STC-6 | 160 | 6 | 0.37 | 45 | 3/8×2×2 | 780×260×650 | 70 | ||
| STC-9 | 160 | 9 | 0.75 | 56 | 3/8×4×2 | 780×260×650 | 73 | ||
| STC-12 | 160 | 12 | 1.5 | 80 | Indirect | 3/8×6×2 | 780×260×650 | 75 | |
| STC-18 | 160 | 9×2 | 1.5 | 200 | Oil | Cooling | 3/8×6×2 | 900×400×810 | 110 |
| STC-24 | 160 | 12×2 | 2.2 | 315 | 3/8×6×2 | 900×400×810 | 110 | ||
| STCH-9W | 160 | 9 | 0.75 | 165 | 3/8×4×2 | 900×400×810 | 90 | ||
| STCH-12W | 160 | 12 | 1.5 | 235 | Indirect | 3/8×4×2 | 900×400×810 | 115 | |
| STCH-24W | 160 | 24 | 2.2 | 315 | Water | Cooling | 3/8×4×2 | 900×400×810 | 130 |
| STCH-9 | 300 | 9 | 0.55 | 45 | 3/8×4×2 | 900×400×810 | 120 | ||
| STCH-12 | 300 | 12 | 0.75 | 60 | Indirect | 3/8×4×2 | 900×400×810 | 140 | |
| STCH-24 | 300 | 24 | 1.5 | 165 | Oil | Cooling | 3/8×4×2 | 900×400×810 | 210 |
| STC-6W-2D | 95 | 6×2 | 0.37×2 | 45×2 | 水 | Direct |
3/8×2×4 | 900×400×810 | 110 |
| STC-9W-2D | 95 | 9×2 | 0.75×2 | 56×2 | Water | Cooling | 3/8×4×4 | 900×400×810 | 115 |
| STC-6-2D | 160 | 6×2 | 0.37×2 | 45×2 | Indirect |
3/8×2×4 | 900×400×810 | 120 | |
| STC-9-2D | 160 | 9×2 | 0.75×2 | 56×2 | Oil | Cooling | 3/8×4×4 | 900×400×810 | 125 |
Diagram of installation:
