EN
AR
BG
FR
DE
IT
JA
KO
PT
RU
ES
LT
SR
VI
HU
HX(*) 218 Injection Molding Machines
Description
Description
HX 218 horizontal injection molding machine adopts the hydraulic transmission system and is driven by the servo motor. Highly energy-saving molding machine is characterized by a high speed response accumulator, which can effectively save the hydraulic oil in hydraulic system and release it out again when necessary. Based on the flexible response, high speed injection molding is fulfilled. As specialist plastic moulding device supplier in China, we provide various injection molding machine models for options.
- Product introduction
- Inquiry Now
Description
HX 218 horizontal injection molding machine adopts the hydraulic transmission system and is driven by the servo motor. Highly energy-saving molding machine is characterized by a high speed response accumulator, which can effectively save the hydraulic oil in hydraulic system and release it out again when necessary. Based on the flexible response, high speed injection molding is fulfilled. As specialist plastic moulding device supplier in China, we provide various injection molding machine models for options.
Advantages
1. HX 218 horizontal injection molding machine runs effectively by keeping the balance between energy supply and demand. Specifically speaking, power system can provide the accurate amount of the energy according to that the injection molding machine needs. In this way, energy loss is avoided.
2. As the “new break-through”, HX 218 plastic moulding machine is distinctive due to the pressure close-loop control. It can adjust the setting pressure and actual pressure to the same.
Why Do People Choose Our Injection Molding Machine?
Parameter :
| MODEL:HX(*)218/730 | |||||
| TECHNICAL PARAMETER TABLE | A | B | C | ||
| INJECTION UNIT | SCREW DIAMETER | mm | 45 | 50 | 55 |
| SCREW L/D RATIO | L/D | 22.2 | 20 | 18.2 | |
| INJECTION CAPACITY (THEORETICAL) | cm3 | 349 | 431 | 522 | |
| INJECTION WEIGHT(PS) | g | 324 | 400 | 485 | |
| Oz | 11.4 | 14.1 | 17.1 | ||
| INJECTION PRESSURE | MPa | 210 | 170 | 140 | |
| INJECTION RATE | g/s | 128 | 158 | 192 | |
| PLASTICIZING CAPACITY | g/s | 18 | 25 | 32 | |
| SCREW SPEED | rpm | 170 | |||
| CLAMPING UNIT | CLAMP FORCE | KN | 2180 | ||
| OPEN STROKE | mm | 520 | |||
| MAX. MOULD HEIGHT | mm | 580 | |||
| MIN. MOULD HEIGHT | mm | 200 | |||
| SPACE BWTWEEN TIE-BARS (W×H) | mm | 520×520 | |||
| EJECTOR FORCE | KN | 80 | |||
| EJECTOR STROKE | KN | 150 | |||
| EJECTOR NUMBER | n | 9 | |||
| OTHERS | PUMP PRESSURE | MPa | 16 | ||
| MOTOR POWER | KW | 18.5/23 | |||
| HEATING POWER | KW | 13.55 | |||
| MACHINE DIMENSION (L×W×H) | m | 5.70*1.34*2.12 | |||
| MACHINE WEIGHT | t | 6.6 | |||
| OIL TANK CAPACITY | L | 281 | |||
Mold Plate Dimension:
