Home » Products» Plastic Injection Molding Machines »HXH 330 high Speed Injection Molding Machine

HXH 330 High Speed Injection Molding Machine

Features:
1. Plasticizing system is designed to perform low-temperature injection, making the injection molding machinery energy-saving and environment-friendly. Plastic products are with high tenacity and toughness.
2. Advanced hydraulic system achieves low pressure injection; it makes the machine gain better mechanical protection, have longer mold service life, and manufactures products with low stress and deformation.
3. Optimized control system achieves fast response speed; it makes the machine obtain higher shot rate in a short time and reaches the best within 0.3 second.




HXH 330 High Speed Injection Molding Machine:
MODEL:HXH 330
TECHNICAL PARAMETER TABLE  
INJECTION UNIT SCREW DIAMETER mm 55
SCREW L/D RATIO L/D 24
INJECTION CAPACITY (THEORETICAL) cm3 582
INJECTION WEIGHT(PS) g 529
INJECTION PRESSURE MPa 185
SCREW SPEED rpm 310
CLAMPING UNIT CLAMP FORCE KN 3300
OPEN STROKE mm 625
MAX. MOULD HEIGHT mm 650
MIN. MOULD HEIGHT mm 250
SPACE BWTWEEN TIE-BARS (W×H) mm 720×670
EJECTOR FORCE KN 125
EJECTOR STROKE KN 180
OTHERS PUMP PRESSURE MPa 16
MOTOR POWER KW 30*2
HEATING POWER KW 20.3
MACHINE DIMENSION (L×W×H) m 7.02*1.77*2.18
MACHINE WEIGHT t 13
Special Specification of high speed machine:
1. Proportional direction valve for mold opening and closing
2. Single cylinder injection
3. Infrared ray heating bands
4. SSR heating relay
5. Bimetallic screw
6. Taiwan TECHMATION controller
7. Italy PHASE servo motor
8. Japan Sumitomo oil pump
9. 10 groups of blast valves
10. 2 water distributors (quick connectors, total 20 in & 20 out)
11. All bushings of toggle system are with graphite for better self-lubrication
12. High injection speed and acceleration without accumulator
13. Automatic central lubrication with lubrication oil