- Plastic Injection Molding Machines
- HXF Series Standard Injection Molding Machine
- HXM Series Servo Motor Injection Molding Machine
- HXW Series Variable Pump Injection Molding Machine
- PET Series Injection Molding Machine
- PET Preform Injection Molding Machine
- PET Cap Molding Machine
- High-speed Injection Molding Machines
- Injection Molding Machine for Thin Wall Production
- Injection Molding Machine for Disposable Spoons and Containers
- HXZ Series Two Platen Injection Molding Machines
- PVC Preform Injection Molding Machine
- Custom Injection Molding Machines
- Unmixed Two Color Injection Molding Machine(HXS Model)
- Mixed Two Color Injection Molding Machine(HXS/h Model)
- Thermoset Injection Molding Machine
- Plastic Auxiliary Machines
- Plastic Hopper Dryer
- One Piece Complete Auto Loader
- Water Cooled Chiller
- Plastic Crusher
- Plastic Vertical Color Mixer
- Plastic Dehumidifier
- Mold Temperature Controller
- Belt Conveyors
- Color Dose Mixer
- Swing-Arm Robot
- Plastic Injection Mold
- PET Preform Mold
- Commodity Mold
- Household Appliances Mold
- Auto Parts Mold
HXS/H530 Mixed Two Color Injection Molding Machine
Description
HXS/h mixed two color injection molding machine is used to mold dual-mixed-color plastic products. Its main injection unit is mounted in the center of the fixed platen. And the side injection unit is installed vertically upon the main unit with a certain oblique angle. The two injection units can be controlled separately and co-work to produce mixed-color products. Apart from this, the machine takes full advantage of space without occupying large floor space. We offer you various combination types of main injection units and side injection units. Customers can choose certain specified mixed two color injection molding machine according to their needs.
Features:1.The plastic injection molding machine is configured with high-standard components.
2. It is specially equipped with the double cylinder to keep the injection balance.
3. For accurate operation, four-stage setting is provided for injection speed, pressure and position control, and three-stage for material charging speed, pressure and position control.
4. When mixed two color injection molding machine is injecting plastic materials, the injection position is timely monitored and controlled.
5. Special protection is provided during screw cold start.
Parameter :
| MODEL:HXS/h530 | ||||||||
| TECHNICAL PARAMETER TABLE | A&A | A&B | A&C | B&A | B&B | B&C | ||
| INJECTION UNIT | SCREW DIAMETER | mm | 75 | 80 | 85 | 60 | 65 | 70 |
| SCREW L/D RATIO | L/D | 21.3 | 20 | 18.8 | 22.7 | 21 | 19.5 | |
| INJECTION CAPACITY (THEORETICAL) | cm3 | 1634 | 1860 | 2099 | 905 | 1062 | 1232 | |
| INJECTION WEIGHT(PS) | g | 1495 | 1701 | 1921 | 841 | 988 | 1145 | |
| Oz | 52.7 | 60 | 67.7 | 29.6 | 34.8 | 40.4 | ||
| INJECTION PRESSURE | MPa | 191 | 168 | 148 | 190 | 162 | 140 | |
| INJECTION RATE | g/s | 382 | 435 | 491 | 258 | 300 | 348 | |
| PLASTICIZING CAPACITY | g/s | 52 | 57 | 62 | 40 | 48 | 57 | |
| SCREW SPEED | rpm | 150 | 180 | |||||
| CLAMPING UNIT | CLAMP FORCE | KN | 5300 | |||||
| OPEN STROKE | Mm | 830 | ||||||
| MAX. MOULD | mm | 830 | ||||||
| MIN. MOULD | mm | 330 | ||||||
| SPACE BWTWEEN TIE-BARS (W×H) | mm | 860*810 | ||||||
| EJECTOR FORCE | KN | 181 | ||||||
| EJECTOR STROKE | KN | 230 | ||||||
| EJECTOR NUMBER | n | 17 | ||||||
| OTHERS | PUMP PRESSURE | MPa | 16 | |||||
| MOTOR POWER | KW | 55/30*2 | ||||||
| HEATING POWER | KW | 41.9 | ||||||
| MACHINE DIMENSION (L×W×H) | m | 8.81*2.24*2.5 | ||||||
| MACHINE WEIGHT | t | 22 | ||||||
| OIL TANK CAPACITY | L | 1156 | ||||||
Mold Plate Dimension:
